People who bought this product also bought
RVMasking 7 Layers Top Heavy Duty 5th Wheel RV Cover with 4 Tire Covers for 28'1"-43'
- Enhanced Wind Protection - Alongside two over roof straps, we include an extra-long horizontal strap that wraps around the bottom of your RV to prevent wind from entering and causing the cover to billow and tear. Additional bottom windproof straps, bottom around elastic hem, and front and rear tension panel straps ensure a snug fit tailored to your RV’s shape. Enjoy peace of mind knowing your 5th wheel trailer is protected with a secure fit every time
- Genuine Thickened 7-Layer Fabric - Crafted from genuine 7-layer non-woven fabric, our true heavy duty fabric with 4% anti-UV composite provide excellent protection against UV, snow, dust, and scratches. Plus, the outer layer features a water-repellent coating to make rain bead up and roll off effortlessly. A breathable membrane in the middle layer help expel moisture on sunny days to keep the interior dry
- 30% Increased Durability - Upgraded from old version with only small patches on 4 or 8 bottom corners, our 5th wheel rv cover protect 8 corners with extra-long reinforced patches. Larger patches design minimizes the risk of punctures and tearing from sharp edges. Plus, The rear corner patches are heightened to protect against ladder edges, further preventing tears. With thicker fabric and thoughtful design, we ensure better user experience and product lifespan
- Tire Cover & Abundant accessories - Package includes 4 tire covers, so you don’t need to purchase them separately. Plus, it comes with ①a thoughtful detailed instruction specially designed for 5th wheel trailer guides you step-by-step through the setup process, ②6 gutter spout covers to protect the sharp gutter for RV, ③2 weighted toss metal sticks for easier strap installation, ④a repair patch for minor rips
- Access Upgraded & Ventilation - Besides 3 zippered roll-up side panels for easy interior checks and loading, there are also 1 rear zippers panels designed for 5th wheel toy hauler trailers, easily load/unload large outdoor items like bikes and motorcycles. Suitable for most entry doors. Featuring 10 vents on the sides and ends, our cover promotes airflow to keep the interior dry and balances air pressure, preventing moisture buildup
- Support & Complete Kit - Backed by 24-month product support and weekday 24hr service. Each kit comes ready to install and includes 1*40'1"-43' 5th wheel trailer cover; 4*tire covers; 1*horizontal long strap; 2*over roof strap; 8*bottom windproof strap; 3*panel straps; 1*storage bag; 6*gutter covers; 1*adhesive repair patch; 2*weighted toss metal stick. Please measure your RV before purchase for the right size
Trusted Purchase with RVMasking
-We specialize in RV covers and design protective covers for all types of RVs.
-We conduct market research every year to update our product to provide our customers with the latest, superior product quality.
-We provide prompt and professional after-sales service for our customers.
Key Features and Its Function
-7 Layers Top Non-woven Fabric
-3 Layers Side Non-woven Fabric
Waterproof Protection and Ventilation
-Mixed with Waterproof Membrane
-Air Vents on Each Sides
Windprood Protection and Custom Fit
-3 Extra Ultra-long Straps: 1 horizontal strap and 2 over roof straps
-Several Bottom Windproof Straps
-Adjustable Front and Rear Tension Panels
-Elasticized Hem Corners
Tearproof Protection
-Reinforced Edges and Corners
-Gutter Covers Included
Anti-UV Protection
-Anti-UV Agent From 4% to 5%
Easy access In and Out of the RV
-Roll-able zippered doors on passenger side and the rear, suitable for toy hauler
BEFORE PURCHASE
-Do not rely on the manufacturer's specifications. Get the cabin length by real measuring and make sure the cover’s length, height and width is long enough for the cabin.
-If the roof length or cabin length gets close to the edge of the size range, please choose the next larger size and use the straps in the package to tie the cover right.
-Measurement should include all external accessories such as AC unit, ladders, spare wheel, antenna, etc., but should not include tow bar, tongue jack, propane tank and wheels.
Care and Maintenance
-Do not store or roll up RV cover while wet.
-Be sure to clean and dry before storage.
-Any problem or suggestion please contact us.
Shipping Locations
RVMasking provides free delivery service only in the United States. Not available for sale outside the United States.
Shipping Fees
If your location belongs to remote areas, the resulting remote costs borne by the buyer. (Customer service specialists will contact before shipping)
We only support PayPal and Credit Card payment (Visa, Mastercard, Discover, etc). All our products are shipped free of charge, so the user only has to bear the cost of the product and no extra charges will be incurred.
Shipping Carrier
FedEx、USPS、UPS、Amazon Logistics
Processing and Delivery Time
- Processing Time: Usually 1-2 Business Days. (Except holidays)
- Shipping Time: Usually 2-5 Business Days. (Ships from our overseas warehouse in the USA)
Orders during Saturday and Sunday will be processed as quickly as possible on Monday. It may take longer process to process and deliver your orde during peak seasons. We sincerely appreciate your understading and patience.
Affected by Covid-19, the arrival time will be delayed(If you do not receive the goods for more than 15 days, please contact us by email at Support@rv-masking.com in time, we will compensate according to the product logistics)
Track Your Orders
When your order is dispatched we'll send you an email with your tracking details so you can follow its journey. If for any reason you don't receive this, please email us at Support@rv-masking.com and we'll update you on your order's progress.
Contact Us Any Time
You are welcome to email us at Support@rv-masking.com any time if you need any help with your order.
① RV Cover Installation Guide
Step 1: Put the tire cover on first. Slide the cover over the tire, took the bungee to one side, toss around the back of the tire and connect it to the other side.
Step 2: Find a nice large area to spread the cover, unfold it. Find the front and back of the cover. (The side with sewn "front" tag, that's the front)
Step 3: Flip the cover and make sure the top is facing upward. Fold over one side of the top, the other side of the top, from the bottom loosely roll up the cover toward the front.
Step 4: Take the cover to the top and put it on.(Tips: remember to make your roof clean with no twigs branches)
Step 5: Put the gutter cover on and drop one side of the cover, over the front and back. The other side is the same. Make sure all folds are out and equally space side to side.
Step 6: Put all the staps tight (including triangle straps, medium traps, and large straps)
You are so welcome to email us at Support@rv-masking.com if any help is needed.
② Boat Cover Installation Guide
Place cover over the front portion of your boat. Then pull cover slowly over the vehicle until it covers the boat. (Remember: Avoid any sharp corners as you install the cover. You may wish to pad sharp angles or tape them over with a piece of material before covering.)
Trailering With Your RVMasking Cover
- Place the long black strap through the belt sheath sewn on the cover back. Attach the strap ends into the special non-corrosive buckle. You can adjust the length of the strap using the buckle.
- Then secure the elastic cord under the middle belly of the boat or pwc.
- Then cinch up all straps tightly, so as to keep the wind from tearing the cover off when you drive. (Warning: When transporting, cover must be fastened in such a way as to eliminate "Wind Flap". Improper installation or failure to tighten the belts & straps, may cause the cover to tear.)
STRAPS: Buckles that face down will tie to each other going under. to opposite side. The buckles that face up will tie over the cover to opposite sides. The straps will wrap the entire boat going under the hull and over the boat cover refund meeting at the rub rails to connect to the buckles.
Cleaning Your Cover
Any cover will slowly collect dust on its underside, picked up from contact with the surface of the vehicle. Do not use machines with agitators - this can damage the cover and actually cause rips or tears. Do not wash in hot water! DO NOT put the cover in an automatic dryer (the fabric can melt). DO NOT dry clean. Another way to clean the dust from either the inside or outside of the cover is to put it on the vehicle and hose it off. To clean the inside, put the cover on the vehicle inside out(this can only be done if you do not have an external antenna). After rinsing off the cover, leave it on the vehicle to dry. Then fold it and return it to the trunk or usual storage place.
Installing Cover With Loops & Tie Down Straps :
Based upon the size of your boat cover, it may not be necessary to use all of the tie down straps.
- Step 1: Thread the buckle-end of the strap through the tie down loop from back to front. Pull through approximately 12 inches and tie-off with a simple overhand knot so that the strap is secure.
- Step 2: Guide the opposite end of the strap around the trailer from back to front.
- Step 3: Thread the strap through the top slot in the quick release buckle from back to front, pulling the end of the strap toward you.
- Step 4: Continue threading the strap over the center bar of the buckle and into the bottom slot of the buckle. The strap is now fully adjustable by pulling down on the loose end of webbing. Install all the straps on the cover before tightening.
- Step 5: Be sure the cover is centered on the boat, then tighten all straps securely so that the cover is taut.
- Step 6: Trim the straps. Leave approximately 12” of webbing for adjustability and trim off any excess using a pair of scissors. Lightly singe the cut edge of the webbing using a cigarette lighter to fuse the yarns and prevent the webbing from unraveling.
DO NOT SET ON FIRE AND BE SURE TO EXTINGUISH ANY FLAMES. To remove the boat cover, simply disconnect the quick release buckles by squeezing the sides. For quick and easy re-installation of the cover, leave the straps attached to the tie-down loops. After first use, check straps for tautness. If they require adjustment, untie knot and refer to step 1.
③ Car Cover Installation Guide
STEP 1: Make sure your vehicle is clear of any dust or dirt particles, so they do not get trapped in between the cover and your vehicle surface.
STEP 2: Carefully remove your RVMasking Cover from the carrying case on the top of your vehicle with the front of the cover facing the front of your vehicle, being careful it does not touch the ground. We suggest beginning towards the rear of your vehicle.
STEP 3: Slowly unroll the cover down the middle of the vehicle towards the back and cover the rear of the car making sure the edge of the cover is under the bumper.
STEP 4: Now, roll the front of the cover towards the hood of your vehicle unrolling the side as you move forward. Do the same for the other side of your vehicle.
STEP 5: Pull the front edge of the cover underneath your front bumper. Adjust the cover where needed to ensure that all areas are covered.
STEP 6: Use the strap and buckle clips, or cable lock system underneath your vehicle to secure the cover and ensure that it does not move around or get blown away. Adjust where necessary.
Customer Reviews
Contacted RV Masking to confirm fit based on actual measurements. They stated 37-41ft would fit. Keystone Raptor Toyhauler. Did not fit. Several emails they finally stated some models do not fit! They want me to ship to California at my expense and trying to vacuum seal a cover has proven fruitless. Buy at your discretion. My measurement length was 38-06. Keystone states 39’.
This is an excellent product. My husband read the directions and we first spread it out on our driveway, folded it as the directions suggested and rolled it up. The zipper sides were excellent, the downspout covers were great, the tire covers and air vents were excellent. Sun protection, weight, rip resistant, water resistance, color, all we felt were very durable. We have a solar panel and 2 air conditioning units on top plus a ladder on back, this covered everything.
We bought this cover for our 34' 5th wheel. We had used another brand the past 4 yrs & it worked well but was way too big so we decided to try a size the same as our RV. When we were ready to install, we followed the instructions & re-rolled the cover so that when we put it on the roof, it unrolled from front to back. We also unzipped all the zippers & to help with installing. The cover went on the easiest of any cover we've ever had. It fit perfectly & all the straps secured the cover well.
Amazing cover. It has held up well through rain, storms and Santa Ana Winds. The most important thing is to measure your RV and buy the right size. And be sure to tie down good. If you do both those things, this cover will last a long time.
Fit our 40’ Jayco 5th wheel like a glove. Took about an hour to install. Once we got it on the roof, it was quite easy. My husband tied a rope around it and then pulled it up on the roof, while I pushed from below with a broom. We are 69 years old, so it shouldn’t be too hard for anyone younger. It is very high quality and has many straps to hold it in place. It has 4 zippers which makes it possible to open all of the storage bay doors, and even the main door. It stays put in the wind and we have zero complaints.
