Are you looking for a high-quality bimini top / sun canopy for boats? Then you've come to the right place, because - here at RVMasking - you'll find everything.
RVMasking is your competent partner when it comes to equipping your boat. Quality, stability and durability are some of the most important factors to consider when purchasing a Bimini Top for Boat. RVMasking will be happy to help you with this.
What is a bimini (top) for boat?
The bimini is an open sun canopy on a boat, ship or yacht. It is set up with the help of a variable and mostly foldable support structure made of aluminum tubes or stainless steel tubes and has additional straps depending on the type of boat.
What materials for bimini fabric and poles?
The material or fabric used plays a very important role in the manufacture of bimini tops. It must be UV resistant, waterproof and durable. Polyester fabric 750D is widely used in the manufacture of bimini and tarpaulin and has proven itself over many years due to its durability and robustness.
Depending on the supplier, the bimini will be made from either aluminum or stainless steel as it is strong, reliable and rustproof.
What width do you need for your bimini?
It is important that you select the correct size bimini for your boat. First measure the width for your boat. Please note that you must measure at the points where you want to attach the bimini support legs. Choose the bimini so that the width will be slightly less than the width of the boat.
What height do you need for your bimini?
That depends on whether you want to stand under the bimini or not. Most customers want "standing height" under the bimini. To do this, measure the height of your hull up to the mounting point where the bimini is screwed on. For example, if you have a side wall height of 73 cm and then buy a bimini with a height of 117 cm, then you have a headroom of approx. 190 cm.
What canopy length do you need for your bimini?
Crucial is the size of the boat and the shaded area you want to achieve. For a boat with a length of approx. 6 meters, a cover length of up to 1.8 meters is sufficient. On fly bridge yachts you need a large shaded area, here you can choose a canopy length of up to 3 meters.
In our RVMasking online shop you will find numerous bimini tops / sun canopies for boats.
The varied selection includes 3- or 4-armed Biminis in blue, black, white, gray or burgundy. The biminis consist of a robust stainless steel or aluminum frame with a UV-resistant and waterproof 750D polyester fabric. For added strength, the bimini top Series has three arches and support legs in all widths to allow the bimini to stand upright even when folded.
The bimini/sun canopy can be tightened with the supplied straps and used while driving.
Bimini with three pole brackets
For many boats, a bimini with three rod brackets is usually sufficient. The varied selection includes 3-armed Biminis in blue, black, white, sand, gray or burgundy. The biminis consist of a robust stainless steel or aluminum frame with a UV-resistant and waterproof polyester Oxford 600D. This sun canopy is firmly supported at the rear and tensioned at the front with strong straps. The bimini can also be used while driving at up to 75 km/h.
Bimini with four pole brackets
Experience has shown that longer boats require a linkage with four brackets. The varied selection includes 4-armed Biminis in blue, gray. The biminis consist of a robust stainless steel or aluminum frame with a UV-resistant and waterproof polyester Oxford 600D. This sun canopy is firmly supported at the rear and tensioned at the front with strong straps. The bimini can also be used while driving at up to 75 km/h.
All models of bimini tops / sun canopies / boat covers fold up and fold back when not in use. A storage bag and mounting hardware are included.
Take your time and look at the countless possibilities in the online shop RVMasking.
At RVMasking you will find a diverse selection of biminis, sun canopies and much more - we look forward to seeing you.